Skip to content
  • There are no suggestions because the search field is empty.

Steelwise release notes

Release 1.3.3

Release date: October 28, 2026

New features

  • Streamlined machine file exports: use the CNC command to export machine files to set locations (as specified in BSET). Typing CNC will open a dialog for exporting in the required format (i.e., CSV, RFY). 
  • Increased Rigid Diaphragm method availability: the Rigid Diaphragm method for Wall Brace Engineering (as set in BSET) can now be used with Australia and New Zealand design standards, in addition to North American standards. The method treats floors and ceilings as rigid diaphragms and distributes loads to bracing lines according to brace stiffness and distribution. (See the Steelwise Updates and How To's PDF for more details). 

Fixes

  • Wind Speed setting changes when switching between job files.
  • Summary Report repeats sections across multiple rows (instead of consolidating rows).
  • Studs extend past the ends of frames imported from FIM files.
  • Additional issues related to FIM imports.
  • Tooling missing from top chord in linear trusses in special cases.
  • RFD outputs fail with a specific CNC data file setting.
  • Issue working in upgraded job files.
  • Weight calculation issue in CNC exports.
  • Failure to save certain changes when listing a truss.
  • Varying material connection tooling conflicts crashes system.
  • Tooling disappears within some jobs.
  • Fixing quantities missing from wall panel detail sheets.
  • PDF command exports to incorrect location.
  • Unable to turn off opening labels using VC (Visual Control).

Release 1.3.2

Release date: October 1, 2026

Fixes

  • Licensing issue blocks access to some features

Release 1.3.1

Release date: September 29, 2026

New features

  • Hold down holes for walls: use the new HOLDDOWNHOLE command to insert an indicator near every stud (offset by a specified distance) in every wall in a panel Detail space.

  • Manual ordering for deep-c joists: set the order in which a roll-former will produce deep-c joists in a floor layout (more details).  
  • Update truss web members only: set Steelwise to update truss web members only (instead of web members and chords) when you use the MU (MEMBER_UPDATE) command in a truss Detail space. (see TSET for context).

Fixes

  • Truss apex chamfers missing when using a specific data file
  • Revit fails to recognize Steelwise-generated FIM files in some instances
  • Steelwise uses material weights from data file instead of Steelwise-calculated weights
  • Typo in Panel Properties Editor
  • Dimple tooling fails to use actual diameter as set in SWM file
  • Smart Panel stick labels use incorrect text height when units set to Imperial
  • PLB (LAP_PANEL) command moves a beam in the model view
  • CV (COPY_VIEW) command fails to work with trusses in a layout
  • Head and sill stiffeners generated for all openings (when set to "extended" in data file)
  • Linear Truss Type 1 web pattern fails engineering at expected material thickness
  • Deep-c frame output fails to follow order in RFY Export dialog
  • Deep-c RFY graphics issues
  • -TTD screw counts not kept for failed trusses
  • RFY deep-c export silently drops every zone after the first in a view
  • Zone labels fail to export for trusses and joists in various files   
  • Girder truss issue

Release 1.3.0

Release date: September 3, 2026

New features

  • Export to Excel: comprehensive data about a job file (material summaries; sticks, openings, and accessory information) can be saved as a XLSX file (more details).
  • Building codes: added support for Philippines National Structural Code loading design code NSCP C101-2015 and earthquake design code NSCP C101-2015 (see all supported codes).
  • Stick IDs in detail sheets: added option to include stick IDs in the materials list at the top of a detail sheet for a wall panel or truss or joist frame. (See Show Stick Label under Detail Sheet Options in PSET, TSET, or JSET for context.)
  • Stick production ordering: added a command that allows you to change the order in which sticks will be produced (more details).
  • Ability to export RFD files via the ACNC or CNC commands (more details).

Fixes

  • Incorrect locations of vertical webs in half truncated trusses in some cases
  • Issue with weight values in reports (when using REP command)
  • Walls intermittently missing in panel reaction plans
  • FIM import incorrectly handling different profiles and incorrectly showing truss quantity
  • Setting Show This Zone Only filter fails to change button to Filters are On in The Panel Builder dialog (when running PPD command)
  • MU command works incorrectly at nog or stud intersections
  • Excessive loads incorrectly applied to wall panels and openings 
  • Excessive time required to erase items in a border (using ERASE command) in Layouts
  • IFC Export command incorrectly allowed to run from Layouts and Detail spaces
  • Input options missing when adding defined (aluminium/timber) openings in a job file set up for Imperial units
  • Incorrect moment capacity applied to boxed sections for North American codes
  • Double girder incorrectly exports as single truss
  • Deflection track slot not lining up with flange hole in some cases
  • Roof pitch and ceiling pitch rounding to integer
  • Webs clashing with stiffener plate in webbed beams
  • CNC disabled for boxing and reinforcing members in trusses and joists
  • IFC Export uses grams (instead of kilograms) for mass unit
  • Issues with tooling not generating
  • CSV export issues

Release 1.2.3

Release date: August 3, 2026

New features

  • Improved opening speed of RFY export dialog
  • Boxing members implemented on deep-c floor layouts
  • References to Clusters under Panel Options in PSET now appear as Junction Studs
  • Screw quantities now display for trusses that fail engineering

Fixes

  • Selecting Use Dual Track (under Tooling Options) prevents tabs from being placed in deep-c trusses

  • Files get saved with errors due to arcs on extruded 3dSolid objects

  • Head and sill stiffeners fail to extend over jamb studs when set to do so

  • Reference marker appears at the wrong location in a detail sheet for webbed beams with a top stiffener

  • Typing MU does not work correctly for webbed beams with a stiffener plate

  • Typing ET and selecting Left or Right for Tool Alignment results in opposite alignment in some cases.

  • Typing DETAIL_CHECK fails to highlight sticks where the Machine Name field is left blank or is set to 0

  • IFC exports a beam as a b-rep but not as a swept solid body

  • Incorrect file name used when exporting to NEXA 

  • Value set in Exposure Factor field (under Wind Options in BSET) fails to save correctly 

  • Long service hole drawing at half its actual diameter

  • Typing A3D fails to produce a model for certain openings with head beams

  • Text in the Opening Editor does not appear in red when an opening fails engineering

  • The Opening Editor displays an unusual engineering status
  • Setting True for Use Junction Studs (under Construction Information in Panel Properties Editor) does not work

Release 1.2.2

Release date: July 16, 2026

Fixes

  • RFY export error

Release 1.2.1

Release date:  July 16, 2026

New features

  • Implemented Malaysia design codes

Fixes

  • Using the I (interior boundary) option for smart panel input commands (e.g., SR) crashes software
  • Model Name (i.e., material name) containing spaces crashes software
  • Naming issue with deep-c members in CSV exports
  • Truss engineering status using wrong color when engineering fails

Release 1.2

Release date: July 1, 2026

New features

  • Implemented new Eurocode loading code, design code, and earthquake code

Fixes

  • Truss bracket plan issue with multi-level roof layouts
  • Flashing command not working
  • Truss Point Load and Solar Panel Loads not working for user trusses
  • Frames incorrect in RFY if set to Do Not Detail or if quantity changed after being sent to Detail sheet
  • Detail Check (DC) improvements
  • Doorway bottom plate offset not working
  • Error on shutdown
  • Noggin Height dimensioning displayed incorrectly in imperial measurements
  • Engineering Status = 1% instead of ERROR
  • SHS & RHS beams drawn at an angle in 2D do not show in 3D
  • JLA not honoring redline text
  • DM command does not work on lines
  • Missing/Duplicate GUID for copied Detail space
  • PUA/PPD speed issue
  • CSV files not separated by Profile/Gauge
  • Wall junction centre stud issue
  • Heel Height Calc Option 99 using lower flange height
  • MU changes boxing member orientation in trusses
  • CSV Export Issues
  • Deleting copied frame in layout also deleting original in Detail sheet
  • IW not working correctly when truss web geometry set to negative value

Release 1.1.6.0

Release date: June 9, 2026

New features

  • Improvements to RFY Export selection user interface

Fixes

  • Roof Area calculation in PCB incorrect with User Trusses

  • MU/MS Command not working well with B2B trusses

  • Panel Load empty in Layer 0

  • Centre plaster stud in wall junctions

  • CSV Export - Frame Clone Quantity not being included

  • Noggin material incorrectly displayed in Panel Properties Editor

  • Incorrect value exported to RFY

  • Truss Engineering Status not updating during edits

  • PPD crash occurring when engineering turned off in BSET

  • Steelwise hanging when listing multiple items

Release 1.1.5.0

Release date: May 20, 2026

Fixes

  • Job Upgrade issue for jobs using FRAMECAD_FT_i.dat generic file with 362S162 material

  • "Noggin Type" not showing when listing wall

  • Error in RFY export

  • Revert print scaling changes

Release 1.1.4.0

Release date: May 14, 2026

New features

  • Option to filter Models and Materials to only producible ones

  • Option to change the PSA stud array colour

  • Label on/off option for small sticks

  • CSV CNC export license feature changes

Fixes

  • RFY Export - 3D Data issues

  • Imperial drawing not to scale

  • R3D fix

  • Smart panels are not keeping the tooling options set

  • RFY panel stack order does not match the stack order in the layout

  • Smart Panel default system name issue

  • Truss Usage Report (REP - Detail Sheet) quantities incorrect

  • Smart panels not exporting to IFC

  • Changing a beam size is not updating in the 3D

  • CSV Export - Frame Quantity issue

  • Smart Panel 2D RFY graphics issue in imperial

  • Smart Panel stud orientation issue

  • Stud Deflection Check setting issue

  • Panel Jacks in TSET are not adding machine settings to sticks

  • Unable to upgrade jobs that contain smart panels

Release 1.1.3.0

Release date: April 30, 2026

New features

  • Tooling DLL to allow for CSV Export

  • Dimple Location updates

  • IFC offset option added to BSET

  • Option to remap data files when obsolete data files are used

  • Imperial design thickness to BMT thickness conversion option added to BSET. Option to also include in any future data files as the default setting. 

Fixes

  • Parallel Trusses not picking up Oncoming Loads

  • Member Update (MU or MS) incorrectly changes bracing

  • Tool Draw Style Issues

  • B2B and Boxed Stud options not working with Smart Panels

  • Smart Panel RFY Reference Point Location Issue

  • Rounding issue with imperial units

  • Some stick issues when upgrading v9.2 jobs

  • Deep-C tab tooling missing on upgraded job

  • "Tabbed" : false option in SWM file not working

  • Deep-C RFY Export Fails After Overwrite Prompt

  • TTD showing bottom chord restraints when it shouldn't

  • Reinforcing member not upgrading in correct orientation from 9.2 file

  • Member Break (MB) not deleting finish end of joists

  • Webbed Beam upgrade issue with RL height

  • Unable to migrate the very old customer specific job files

  • Wind Beam rename to Stiffener

  • BeamsPosts not being exported in IFC

  • SHS and RHS Beams are not showing 3D

  • Smart Panels not exporting to IFC

  • Onpage report note positioning tidy up

  • Bracing plan columns should not be labelled

  • Smart panel 'I' input option not working

  • Tooling graphics incorrectly visible in 3D

  • MU/MS command not working well when studs butt up against nogs/top plates

  • Triple Web Hole using incorrect hole spacing value for some section profiles

  • RFY not picking up the total truss quantity

  • K-braces not building correctly on raked walls

  • GUID's on beams not correct

  • Member Update (MU) not working correctly with negative truss web end clearance

  • Can't edit the watermark text in BSET

  • Boxing a jack rafter has no tooling in RFY

Release 1.1.2.0 

Release date: March 17, 2026

Fixes

  • Studs are not changing colour with the Light Background

  • JSET label options don't save and set labels

  • License not activated correctly

Release 1.1.1.0

Release date: March 2026

New features

  • Include the drafter name in detail sheets

  • Stud Array (PSA) stud colour to differ from other studs

  • Ability to Rake Webbed and Structural Beams

  • IC to check for duplicate frames in Stacks

  • Add stick start and end points to RFY

  • Add SED when trusses have support line but no truss/frame connection found

  • Cut list generator as exists in QuikSeries

  • Minimum fastener quantity (F4) note moved closer to the joist on detail sheet to make it more obvious

  • Import FIM joist frames

  • FIM import system to use the material width

  • Option to add deleted reference markers in detail sheet

  • Tooling DLL Update

  • Webbed Beams wind stiffener member option added

  • Template files updated

  • Convert old job file k-braces to custom entities for file upgrade compatibility

  • Keep RFY window open after export

Fixes

  • Brace capacity with length <350mm set to 0

  • Fastener listing information set to read-only

  • Steelwise not using system proxy for network communication

  • Copy Material Info Prompts Twice

  • Moving/Deleting reference point marker in smart panel causes Live tooling to misplace

  • Column height and width not editable

  • Truss webs overlapping

  • Never calculate head still placing stiffener fixed

  • IC not recognizing posts

  • Webbed Joist End Member Orientation fixed

  • PCB report export is giving an 'Open' file pop up instead of 'Save'

  • Summary (SUM) units incorrectly shown as mm in the PDF output

  • Building Summary missing from BSET

  • Panel Builder (PPD) print issues

  • Tooling location incorrect on smart panels if reference marker missing

  • Wall width not changing when listing and changing models

  • Partial boxing of rafters not working

  • Listing End Tool Action resets 'Increase' and 'Location' values to 0

  • Material and Qty text on the Detail Sheet clashing or too close (run OR to fix existing jobs)

  • Job upgrade from Structure not showing Smart Panels in RFY

  • Panel labels are not updating from the panel properties editor

  • Unable to 'Upgrade' job file due to System Name case sensitivity

  • Bracing/holddown plan returning missing GUIDs

  • Reinforcing Member web hole tooling location not quite right

  • Wall panel Engineering not considering distributed loads from trusses

  • MWF FIM Import Error

  • Boxed wall members not showing hatching

  • Boxing chord adding extra node for B2B trusses

  • Roof Strap bracing not being reported

  • Smart Panel - Internal Boundary input no longer working with wall panels

  • JJD Crash fixed

  • Machine Configurator not filtering wall/smart panel models correctly

  • FF does not work in 3D Model space

  • SH (Show Height) does not work

  • Right-Handed half truss Reference Point wrong in the Detail Sheet

  • Price Editor not working

  • MU command removes screws in webbed beams

  • Total Weight of multiple (cloned) frames not showing in REP reports

  • Wall tooling not showing when Lintel Plate is present

  • Structural Panel Opening calculation issue for UDL Floor Live Load

  • XML Export Difference After Upgrade from Structure 9.2.5 version file

  • JJD crash fix

  • PPD Hanging on customer job

  • Opening height increasing when adding multiple openings using AW

  • Unable to add lintel plate to Webbed Beams in layout

  • No tooling when changing system name on frames

  • Weight discrepency between Detail Sheet and REP report

  • MO not working with rectangles

  • PN not correct

  • ME is not failing trusses

  • PIB text in incorrect location

  • PDF command throws an error in customer job

  • RH Truss member overlap

  • LI and changing common parameters across frames using different machines not working

  • Licensing to close Intellicad when license invalid

  • Job name not sent on upload to Nexa

  • RFY Export warning message resolution

  • REP unit inconsistencies

  • B2B truss web placement issues

  • Web pattern issue with B2B trusses

  • Beam Header material extending through jamb studs

Release 1.1.0.0

Release date: November 2025

New features

  • Extra FIM Import functionality added to FC_Import command

  • Import FIM sticks into layout for walls and smart panels

  • Import FIM sticks into detail sheet for walls and smart panels

  • Import FIM Floor frames and sticks into detail sheet

Fixes

  • Truss member numbering incorrect

Release 1.0.10.0 

Release date:  November, 2025

New features/changes

  • Rename items that reference XML under Export Options (in BSET dialog, Options tab)

Fixes

  • Listing trusses and changing System Name not updating Models

  • Node layout discrepancies between Steelwise and Structure

  • IFC output message on the Command Bar

  • B2B stud gap not being applied when using imperial data files

  • Unable to upgrade job due to missing BeamsPost data file

  • Unable to add Sill Stiffener

  • Wall panel Notching issues

  • Incorrect CSV output for Generic machine

  • Opening header report beam material name incorrect

  • RFY issue with one panel

  • Smart Panel RFY export creating multiple service hole toolings in the same location 

Release 1.0.9.0

Release date: November 2025

New features/changes

  • Explicit Tool Alignment

  • Licensing command/pop up for user sign in

  • Truss Connector Thickness and Grade refinement

  • Improve Truss Uplift Plan (TUP) notes

  • HASP trial licence enabled

Fixes

  • Wall and opening labels overlapping after upgrading job

  • Member Lengthen (ML) not working with undo

  • SUM Report separated quantities fixed

  • Truss connector for parallel trusses fixed

  • Incorrect truss connector quantity in REP command

  • Duplicate GUID's when using 'copy-paste' on trusses

  • Dimension Member (DM) for joists not working

  • Snaps disabled after Onpage Truss Summary (TOS)

  • Grips turn off after moving/stretching entity

  • Incorrect bracing capacities in the Bracing Plan

  • IFC not working for beams

  • Incorrect post weights on reports

  • Opening a new drawing and running BSET causing crash

  • Identical joists replicated separately in Joist Builder

  • Columns not exporting in IFC

  • Floor Beam JJD crash

  • Drawing names not correct when saved on a network

  • Incorrect Truss weight on Detail Sheets

  • Missing GUID after running the Strip command

  • RFY issue due to missing/duplicate GUIDS

Release 1.0.8.0

Release date: October 2025

Fixes

  • Licence bug 

Release 1.0.7.0

Release date: September 2025

New features/changes

  • Manual sort order for RFY Export

  • Unique, consistent GUIDs for 'extra quantity' trusses

  • Software update notification added

Fixes

  • JLA not working properly

  • SECT command does not print out capacities

  • Truss Rail Status not setting correctly

  • Additional truss quantities to RFY not working

  • Fastener number text collision resolution

  • Web label direction is wrong for imperial job

  • Residual reactions drawn when using PRP

  • Exception after deleting frames

  • Extra fasteners added to joist ends when doubling top/bottom chord 

  • JSET 'Deflection Limits' Issues

  • Wall/Joist incorrectly being deleted from detail sheet

  • Beam deletion issues

  • Engineering All result in the csv export has "NAN" values

  • Member Update (MU) deleting members

  • MS command extends Linear truss bottom chord

  • Wrong on-coming Truss Load in mode 8 (TTD -> Retrieve All)

  • Unable to RFY - Duplicate GUIDS after Copy

  • Member Update \(MU\) causing member connection issues

Release 1.0.6.0

Release date: August 1, 2025

New features/changes

  • RFY Export - 2D drawing data to Factory2

  • Truss end vertical web offset option

  • Webhole tooling at truss heel location

  • BeamsPosts data files to not show in the ADD input

  • Migrated jobs using wrong flange width

Fixes

  • Truss Connection plan not adding "truss to wall" brackets

  • Wrong bracket distribution for Hip roof

  • Double girder on girder loading issue

  • Second Beam Head member is being placed right to left

  • Deep C Floor Joist – Service Hole Engineering Using ET

  • RF for walls very slow

  • Bracing plan Boxes do not change size as per BSET settings

  • Panel reaction Notes clashes with the Reaction Table

  • Repeat Bracing type IDs in the Bracing Plan drawing

  • Incorrect earthquake reaction displayed in the Bracing Plan

  • Editing panel stacks - Dimension and weight not updating

  • Missing data file error during CNC operation

  • Reactor missing on edited members

  • m\_location data wrong

  • LI Joist smart ends visible

  • Deep-C Joists not labeling correctly

  • 50mm Smart Panel 3D member orientation incorrect

  • MD \(Member Divide\) to work on smart panels

  • PAB \(Auto Break\) not warning for remaining overlength panels

  • PSS \(Stud Summary\) command not finding valid drawing

  • HRS Floor Beam 3D Issue

  • Migrating an old job does not place opening text on correct side

  • Tabbed Tooling Option from JSET not correctly carried over

  • Machine Configurator slow to open

  • Joist Detail Design Dwg PDF text issue

  • Smart Panel member label issue

  • Wrong tooling for Linear Truss Special Web

  • Changes in Truss Builder removing support point

  • Boxed truss chord tooling issues

  • Stick Orientation \(Web side and Start End\) not shown in PDF

  • Dropped eave engineering issue

  • Wrong flange width used on imperial data files

  • Wrong Flange Width used when changing stick section

  • 50mm 3D orientation for walls incorrect

  • 50mm Panel Jack depth issue

  • RFY imperial labeling export fixed

Release 1.0.5.0 

Release date: June 19, 2025 

New Features/changes

  • Improvements to Stud Check for K-Brace Calculations

  • Improvements to license warning message for expired license 

  • Linear Truss Rail Member tooling changes

  • Linear truss Engineering model for Rail's new Tooling

  • XML Export Rail tooling changes for linear trusses

Fixes

  • Stick doesn't correctly update after list updates

  • Linear Truss eccentricity check

  • Changing multiple Explicit Tool listings is not upating all

  • Openings not working in smart panels

  • Joint capacity calculated at member mid span

  • Detail Insert (ID) Dialogue Not Holding System Name

  • Truss Splice Engineering Issue

  • Web Holes Missing in XML

  • Beam Head Issues After Upgrading Job File

  • Snaps Not Reverting Back to User Settings after ET

  • ET Tooling Not Showing in Smart Panels

  • PPD - Detail Design Drawing/Stud Design Graphics Issue

  • Gable frames incorrect on short roof blocks

  • Bad Toolings are not being indicated

  • Tooling Option not working: "Treat Truss Rails as Bottom Plate"

  • Profile label using "C" instead of "S" in the RFY export

  •  Listing (LI) changes not setting trusses or joists to "Unknown"

  • AW/UW inserting opening with the multiple option not working

  • TSET Roof Panel 'System Name' Change Issue

  • MC does not cut lines correctly

  • AW windows going in at incorrect height

  • Rigid Diaphragm Annotation not showing on Bracing Plan

  • RFY Export dialog stays on top of all windows

  • Deep C Floor engineering bug when changing material

  • Beam Heads sent to cad do not have a machine applied to them

  • Webbed Joist member change orientation issue

  • Reinforcing Member Bad Tooling

  • K-Brace Placement Issue

Release 1.0.4.0

Release date: May 13, 2025

New features/changes

  • Update to license pop-ups and engineering status

  • License expiration warnings

Fixes

  • Reinforcing Fasteners not added

  • Web Holes placed on Start of Reinforcing Stick

  • Coding beams applies incorrect System Name

  • Incorrect Opening Options when upgrading a job from Structure

  • End Fixing Start Hole information not migrating from DAT file

Release 1.0.3.0

Release date: May 2, 2025

New features/changes

  • On Flat to On Edge fasteners

  • Support Tooling Options for webbed beam

  • RFY export split by material

  • "Tabbed" Tooling Option Visibility

  • ADD - Walls/Beams to Pick Up PSET System Name

  • Software Licensing Dialogue Messaging

  • Update to IntelliCAD 12.1.494

Fixes

  • Fastener Screw QTY display issue

  • CrashHandler exe didn't update version 12 to 1.0 of Steelwise

  • Wrong CAUTION warning of beam weight

  • Truss Bracket positions to be non cumulative 

  • Bracing Plan Legend Issue

  • Extra dimples added to boxed web

  • LC member shear capacity is 0.

  • Deep C frame name in rfy incorrect

  • Incorrect Opening Defaults when upgrading job from Structure

  • Copying Opening End Jacks Tooling Issue

  • Truss chamfer tool added to reinforcing member

  • Incorrect hybrid fasteners

  • K-Brace/B2B Stud Intersection Issue After Running MU Command

  • Fix text string size in Imperial files in RFY Export

  • Reinforcing Fasteners not added

  • CNC Export Layout CSV For Dynamic Steel Has no Output

  • Test2 command gives error for EU codes

  • Webbed Joists Not in RFY

  • ADD not allowing for lintel plates in Detail sheet

  • Save As not updating filename on detail sheets

  • Panel Stud Design Not Updating After Edits

Release 1.0.2.0

Release date: April 16, 2025

New features/changes

  • Tooling DLL update

Release 1.0.1.0

Release date: April 10, 2025

New features/changes

  • Licensing changes

  • TSET - Truss Spacing option to set out trusses to face of truss

  • ADD - Single Saddle Truss input automatically adjusts to correct RL

  • Option added to BSET Various Tools to lock job from all editing

  • AutoRestore command added to restore auto saved files 

  • SUM - Weights added to Site Summary 

  • Custom entity walls

  • PSET and Opening Editor - Opening Head and Sill End Jack Option added

  • PSET - Head/Sill stiffener extension option added

  • Custom entity openings 

  • SUM - Beam/Column Summary added to Summary Report

  • ADD - Wall - Stud setout option added 

Fixes

  • Reinforcing screws not correct in TTD  

  • Incorrect Modulus of Elasticity of Steel (E) in ANSI codes  

  • Dropped eave corner hip truss clearance fixed for imperial

  • Dropped Eave diagonal web location on std truss shape improved 

  • Panel Editor Height prompt information for raked walls not behaving correctly 

  • Stud align front/back option fixed for trusses and joists

  • Double Top Plate fixing holes added  

  • K-Brace issue with double top plate fixed

  • Disclaimer re Smart Panels added to Engineering Guide section 2.2  

  • Beam Head split to base option implemented

  • Beams - 'Go To Detailed Beam' issue fixed

  • Double screwing in headers improved

  • TTD/-TTD replaces missing screws in detail sheet 

  • Beam Head layout reconfigured when split to base

  • Opening label colour fix

  • P3D HRS beams/posts now retain thickness in model space after PPD

  • BSET - Note added re seismic loads

  • Gridline options expanded

  • Model rotation around a reference point

  • Fix for failed heads in raked walls

  • Chinese code load factors updated

  • MU now works for truss bottom chords

  • Chinese code loading issues fixed 

  • Beam list allows for text height change  #32392

  • Beam list option added to reset labels  #32392

  • MI - Wall mirroring updated to work better  #33179

  • Truss apex plate placed when screw count is greater than 2x  

Internal changes:

  • Data file format changes  

  • Snaps on entWalls improved  

  • LI wall model change issues on PUA  

  • Unable to move wall labels fixed

  • Changes to upgrading jobs from previous versions